创建博客 登录  
 关注
   显示下一条  |  关闭

KIP工程复印打印扫描一体机技术探讨

KIP Printer KIPCON E KIPCON II IPS

 
 
 

日志

 
 

HOW TO INSTALLE KIPCON II UNDER OS WINDOWS 2000 & XP?  

2007-09-05 20:32:04|  分类: KIP(KIP2900 7090 |  标签: |字号 订阅

        (如何在Windows2000和WindowsXP下安装KIPCON II) In case of Windows 2000, normally system detect KIP 3 Interface Board as Video Board and automatically install due to Plug-and-Play and then system will not be operated normally under normal installation method.

       1. Install Windows 2000<br>2.Put "/WINNT/Driver Cashe/386/driver.cab" to Trash (Corbeille).<br>3. Install Kernel Driver (But do not re-boot the system after installed).<br>4. Install KIPCON II.<br>5. Shut down the P.C.<br>6. Equip (install) KIP 3 Interface Board.<br>7. Check if Windows 2000 CD-ROM is not inside of P.C. and then re-boot.<br>8. Normally P.C. will say "Detected new device" but cancel the installation.<br>9. "My Computer">"Control Panel">"System">"hardware" and open the device manager.<br>10. Open the property of Video Controller which marked "!" in Display Adapter and then set it to be invalid.<br>11. Return "driver.cab" in the Trash to original position.<br>12. Re-boot the P.C.<br>13. KIPCON II can be able to start as usual, we suppose.

如果您还安装不成功,请咨询您的技术工程师或给本站发送E_mail。

  评论这张
转发至微博
转发至微博
0   分享到:        
阅读(533)| 评论(0)| 引用 (0) |举报

历史上的今天

相关文章

最近读者

评论

<#--最新日志,群博日志--> <#--推荐日志--> <#--引用记录--> <#--博主推荐--> <#--随机阅读--> <#--首页推荐--> <#--相关文章--> <#--历史上的今天--> <#--右边模块结构--> <#--评论模块结构--> <#--引用模块结构--> <#--博主发起的投票-->
 
 
 
 
 
 
 
 
 
 
 
 
 
 

页脚

网易公司版权所有 ©1997-2012